松质骨弹性模量计算的均匀化方法

对松质骨建立了六种单胞微观结构模型，采用均匀化方法和有限元方法计算松质骨的宏观等效弹性模量。给出了六种单胞模型的松质骨弹性模量与材料密度(体分比）的关系，与实验数据进行了对比，分析了不同微观结构模型在不同骨骼中的应用。结果表明，本文方法及六种单胞模型可以对松质骨微观结构和材料性能进行有效的模拟计算。同时本文又着重对松质骨的宏观等效弹性模量与体分比的指数关系进行了探讨。     

碳纳米管-聚丙烯酸乙酯复合乳液的制备及其润滑性能研究

采用乳液聚合方法合成了碳纳米管一聚丙烯酸乙酯(CNTs—PEA)复合乳液;采用JEM100XI型透射电子显微镜(TEM)观察了复合乳液的微观形貌;采用MQ-800型四球摩擦磨损试验机和MM-200型环一块摩擦磨损试验机考察了CNTs—PEA复合乳液作为水基润滑添加剂的摩擦学性能;并采用JSM-35型扫描电子显微镜(SEM)分析了磨斑表面．结果表明,CNTs—PEA复合乳液在极低浓度下即可有效地提高水基液的承载能力和抗磨性能．     

控制力矩陀螺用磁轴承磁力参数的辨识

提出一种实用的闭环辨识方法—磁中心变位移法,可以对控制力矩陀螺用磁轴承的磁力参数进行辨识。这种方法通过在磁中心处改变转子位移,得出不同位移时的电流值,再用这些值进行最小二乘辨识,得出所求的磁力参数。辨识出的电磁力模型中代入实际数据所得输出值与磁轴承实际输出数据非常吻合,证明了辨识所得磁力参数的准确性,并且用所得到的磁力参数指导磁轴承系统控制器参数的选择,使之更好地对磁轴承进行控制。实验证明,调整后的参数使转子在 30 060 r/mim 时仍能稳定地悬浮在给定位置,验证了所得磁力参数的准确性。     

Laser Doppler anemometry measurements of laminar flow in helical pipes

Three-dimensional laser Doppler anemometry measurements are performed on developed laminar flow in three helical pipes. The experimental observations are compared to results of numerical calculations employing the fully elliptic numerical method. Good agreement is found between measured data and numerical results. The three helical pipes, with curvature ratios of 0.0734 and 0.1374 and non-dimensional pitches of 0.0793 and 0.193, are adopted to study the effects of curvature and pitch on laminar flow in the experimental approach. The range of Reynolds numbers is 500–2000 to ensure laminar flow in the entire helical pipe. Both the profile shapes of the normal components of the secondary flow and those of the axial flow along the same centerline present not only similar patterns but also similar change when pitch, curvature ratio, and Reynolds number vary. The results demonstrate comprehensive relationships between the axial flow and the secondary flow.     

Epitaxy of Binary Compounds and Alloys

The present work aims at constructing a theoretical framework within which to address the issues of morphological instabilities (one-dimensional step bunching and two-dimensional step meandering), alloying, and phase segregation in binary systems in the context of (physical or chemical) vapor deposition. The length scale of interest, although nanoscopic, is sufficiently large that the steps on a vicinal surface can be viewed as smooth curves and, correspondingly, the theory is a continuum one. In a departure from theories inaugurated by Burton, Cabrera, and Frank [The growth of crystals and the equilibrium structure of their surfaces. Phil. Trans. Roy. Soc. A 243 (1951) 299–358] the steps are endowed with a thermodynamic structure whose main ingredients are a step free-energy density and edge species chemical potentials. Moreover, crystal anisotropy, with its altering of the dynamics of steps and the associated morphological instabilities, is accounted for – in a manner consistent with the second law – both in the thermodynamic and kinetic properties of terraces and, more importantly, of steps. Additionally, in contrast with most of the literature on the subject (cf. [J. Krug, Introduction to step dynamics and step instabilities. In: A. Voigt (ed.) Multiscale Modeling in Epitaxial Growth. Birkhäusser, Berlin (2005)]), adsorption–desorption along the steps, bulk atomic diffusion, and chemical reactions (both on the terraces and along the step edges) are incorporated and coupled to the other mechanisms, e.g., terrace adatom diffusion and step attachment–detachment kinetics, whose interplay governs the evolution of steps on vicinal surfaces. Importantly, aided by the concept of configurational forces for which a separate balance law is postulated Configurational Forces as Basic Concepts of Continuum Physics. Springer, Berlin Heidelberg New York (2000)]), the proposed theory allows the steps to evolve away from local equilibrium thus contributing to a general treatment of the dynamics of steps. Finally, a specialization to the epitaxy of binary compounds and alloys is afforded, yielding a generalization of the classical Gibbs–Thomson relation in the former and novel evolution equations for an individual step in the latter.     

SYNTHESIS AND CHARACTERIZATION OF SURFACE-HYPERBRANCHED MAGNETITE NANOPARTICLE FOR BOVINE SERUM ALBUMIN IMMOBILIZATION

A hyperbranched polyamidoamine polymer was synthesized on the surface of magnetite nanoparticles to enhance bovine serum albumin (BSA) immobilization efficiency. The amount of immobilized bovine serum albumin (BSA) on the surface-hyperbranched magnetite nanoparticle was up to 2.5 times as much as that of magnetite nanoparticle modified with only amino silane.     

坡面流及土壤侵蚀动力学（II）——————土壤侵蚀

介绍了坡面土壤侵蚀的基本特征和主要类型, 综述了坡面土壤侵蚀动力学过程和预报模型等方面的研究进展, 包括土壤表层结皮、雨滴溅蚀、片流侵蚀、细沟侵蚀、坡面流输沙、土壤侵蚀界限坡度, 以及土壤侵蚀预报模型等. 并简要讨论了土壤侵蚀动力学研究的发展趋势.     

Application de l'approximation polytropique à la Simulation Numérique Directe de gaz chaudsApplication of the polytropique approximation to Direct Numerical Simulation of heated gases

As alternative to the usual assumptions of Boussinesq, we propose, for heated gases, a new approximation called polytropic approximation. With this approximation the quantities of corresponding state are related by a polytropic law of exponent χ of which we neglect the variability in space-time derivations in the equations governing the flow considered. As application, we used this new proposition to solve numerically a heated gas flow in an annular cavity of rotor-stator type. We expose here the numerical method and some results of the polytropic approximation with comparison to results of Boussinesq approximations. To cite this article: S. Benjeddou et al., C. R. Mecanique 332 (2003).     

Effect of air gaps on ballistic resistance of targets for conical impactors

High velocity penetration of a rigid conical impactor into a ductile target with air gaps between the plates is studied using the cylindrical cavity expansion approximation describing impactor–target interaction. It is showed that the latter model predicts improvement of the ballistic performance of the target with the increase of air gaps. It is found analytically that the ballistic limit velocity of the target consisting of N plates with a fixed total thickness with large air gaps increases with the increase of N. The conditions are discussed when the predicted effects can be most pronounced.     

用均匀化理论分析蜂窝结构的等效弹性参数

在线弹性范围内,根据均匀化理论,并结合有限元方法推导出适用于二维周期性结构的均匀化的有限元格式（Homo FEM）,计算出不同相对密度下的规则蜂窝结构的等效弹性模量Ee和泊松比νe.同时,利用蜂窝结构的代表胞元模型,用常规的有限元方法（FEM）模拟计算出相应的等效弹性参数.最后将两种数值计算结果与己有的理论公式进行了比较和分析讨论.结果表明:在考察的相对密度全场范围内（0～0.4）,HOmO FEM得到的蜂窝结构的 Ee和νe 与 FEM使用平面实体单元模拟计算得到的结果一致吻合,反映出 Homo FEM数值方法的客观准确性和可行性.而 Gibson公式和 W-K得到的等效弹性模量值 Ee只是在较小相对密度的情况下（小于0.15）与数值计算结果吻合.当结构的相对密度较大时,必须考虑胞棱附近区域由应力集中导致的复杂的应力和应变分布的影响.